Table of Contents
Advertisement
When you press "DN" on the
power trim/tilt switch twice in
succession, the buzzer sounds
once at a long interval, and the
outboard motor is automatically
tilted down to the preset tilt limit
position. The buzzer continues to
sound at short intervals while the
outboard motor is tilted down.
Even during automatic tilting,
automatic tilt will be forcibly
canceled and the outboard motor
will stop being tilted in the
following cases.
• The power trim/tilt switch is
pressed during automatic tilt
operations
• The power tilt switch (outboard
motor pan) is pressed and held
in the opposite direction of the
tilt direction during automatic
tilt operations
• Any of the engines are started
• Any of the engines are
abnormal (overheating, low oil
pressure, etc.)
Before you can use the automatic
tilt function, you need to set it in
the multi-function display.
For multiple outboard motors, the
power trim/tilt switch on the
remote control lever side can turn
on the automatic tilt mode for all
the outboard motors and the
power trim/tilt switch on the PTT
switch panel can turn on the
automatic tilt mode for each
individual outboard motor.
The power trim/tilt switch on the
remote control lever side turns on
the automatic tilt mode even if the
power switch or engine switch is
off.
8. OPERATION
Power Tilt Switch (outboard
motor pan)
POWER TILT SWITCH
When you are away from the
power trim/tilt switch on the
control lever side, you can operate
the power tilt switch on the
outboard motor side. The switch
operation is the same as that of
the power trim/tilt switch on the
remote control lever side.
95
Advertisement
Table of Contents
