Table of Contents
Advertisement
Digital Projection Ltd. M-Vision WUXGA Series
Laser menu
•
Power Mode
•
Eco will automatically set the laser power to 80%.
•
Normal will set the power to 100%.
•
Set to Custom if you wish to adjust the power manually.
•
Power Level
This setting is only available if Power Mode is set to Custom.
Choose a value between 30 and 100, ranging from 30% to 100% laser power.
•
Constant Brightness
Once a Custom Power Mode has been set, then Constant Brightness can be
turned ON.
This setting will maintain the brightness until the maximum laser power has been
reached. The lower the power level the longer it will be maintained.
•
Brightness Sync Mode
Available when 'Contrast Brightness' is On, otherwise will be grayed-out.
Off: disable Brightness Sync
On (Master): enable Brightness Sync and act as Master.
On (Slave): enable Brightness Sync and act as Slave.
•
Brightness Sync Group
Available when Brightness Sync Enable is On, otherwise will be grayed-out.
Each group allows for one master and eight slave members.
•
Brightness Sync Interval
Available when Brightness Sync Enable = On (Master), otherwise will be grayed-out.
•
Brightness Sync Status
Grayed-out when Brightness Sync Enable = Off,
When Brightness Sync Enable = On (Master), shows how many Slave connections in this group.
When Brightness Sync Enable = On (Slave), shows the conection status with Master.
Rev A January 2024
page 76
USING THE PROJECTOR
Laser
Power Mode
Power Level
Constand Brightness
Brightness Sync Mode
Brightness Sync Group
Brightness Sync Interval
Brightness Sync Status
Scroll
Normal
----
Off
Off
----
----(Min)
Enter
Back
Notes
Operating Guide
Advertisement
Table of Contents
