Digital Projection Ltd. M-Vision WUXGA Series
Digital zoom
Digital zooming enlarges a section of the image, while the area outside the enlarged
section is cropped out to preserve the overall image size.
•
Digital Zoom defines the level of zoom that needs to be applied. If Digital Zoom is
set to 0, then the other settings in the menu will be disabled.
•
Digital Pan and Digital Scan specify the area that is being enlarged:
•
Digital Pan adjusts the horizontal coordinates.
•
Digital Scan adjusts the vertical coordinates.
The Reset command restores the default Digital Zoom, Digital Pan and Digital Scan values.
Overscan
Use this setting to compensate for noisy or badly defined image edges.
Crop removes unwanted artifacts from the edges of your image by cropping the edges.
Zoom increases the size of the image to force the edges off-screen.
Rev A January 2024
page 60
USING THE PROJECTOR
Digital Zoom
Digital Zoom
Digital Pan
Digital Scan
Reset
Scroll
Geometry
Aspect Ratio
Digital Zoom
Overscan
Blanking
Warping Mode
Keystone
4 Corners
Pincushion / Barrel
Wall Corner
Free Grid
Custom Warp
Scroll
Digital Zoom is a temporary
0
setting and not retained after
0
an input change or power
0
cycle.
Enter
Back
Source
Off
Off
Crop
Zoom
Off
Enter
Back
Notes
Operating Guide