Editing Projector Settings; Using A Slider To Set A Value - Delta DIJITAL PROJECTION M-Vision 27000WU Installation & Quick Start Manual

Editing projector settings

If the highlighted menu item contains a list of values to choose from, you can change
the value by doing the following:
1. Highlight the menu item and press ENTER/OK.
2. In the list of values that opens, use the UP and DOWN arrow buttons to highlight
a value, then press ENTER/OK again to select the highlighted value.

Using a slider to set a value

Some parameters open a slider. To set such a parameter:
Press the LEFT or RIGHT arrow button, or ENTER/OK. The arrow buttons will open
1.
the slider and adjust the value at the same time. ENTER/OK will open the slider
without altering the initial value.
2. Use the LEFT and RIGHT arrow buttons to move the slider.
3. When ready, press EXIT to exit the slider and return to the menu, or press MENU to exit the slider without showing the menu
again.
Operating Guide
USING THE MENUS
Menu Name
Highlighted Item
Menu Item
Menu Item
Scroll
List of Values
Parameter Value
Slider
Digital Projection Ltd. M-Vision WUXGA Series
Current Value Some menu items may be
Highlighted Value
unavailable due to settings
Value
in other menus. Unavailable
Value
Value
menu items appear gray.
Enter Back
Notes
Rev A January 2024
page 47