Table of Contents
Advertisement
Digital Projection Ltd. M-Vision WUXGA Series
Positioning the image
The normal position for the projector is at the centre of the screen. However, you can set the projector above or below the centre, or
to one side, and adjust the image using the Lens shift feature (known as rising and falling front) to maintain a geometrically correct
image.
Rev A January 2024
page 108
POSITIONING THE IMAGE
Shifting the lens up (rising front)
Centred Lens
Shifting the lens down (falling front)
Notes
See "Lens control" on page
50 for more information on
shifting the lens.
Whenever possible, position
the projector so that the lens
is centered for the highest
quality image.
Reference Guide
Advertisement
Table of Contents
