Art-Net setup
•
Art-Net Active
Set to On to activate Art-Net DMX electronic light system control via the Art-Net
port. Set the Net, Sub Net, Universe and Start Address for the network.
•
Apply
Select to apply any changes to the Art-Net setup.
Art-Net Channel setting
•
Chanel 1-5
Choose from None, Power, PIC Mute, Power Level, Input and Channel Control.
Select the projector functions that are associated with each Art-Net channel.
Art-Net Channel Status
•
Chanel 1-5
Display current the control value for each channel.
Operating Guide
USING THE PROJECTOR
Art-Net Setup
Art-Net Enable
Net
Sub Net
Universe
Start Address
Apply
Scroll
Art-Net Channel Setting
Channel 1
Channel 2
Channel 3
Channel 4
Channel 5
Scroll
Art-Net Channel Status
Channel 1
Channel 2
Channel 3
Channel 4
Channel 5
Scroll
Digital Projection Ltd. M-Vision WUXGA Series
Off
----
----
----
----
Enter
Back
Power
PIC MUTE
Power Level
Input
Channel Control
Enter
Back
Power
PIC MUTE
Power Level
Input
Channel Control
Enter
Back
Notes
Rev A January 2024
page 85