Connecting The Power Supply
1.
Lift the cable lock up.
2. Firmly push the mains connector into the AC In socket
3. Push the lock down to secure the cable.
Installation & Quick Start Guide
CONNECTING THE POWER SUPPLY
1
.
1
Digital Projection Ltd. M-Vision WUXGA Series
Notes
Use only the power cable
provided.
Ensure that the power
outlet includes a ground
connection as this
equipment MUST be
earthed.
Handle the power cable
carefully and avoid sharp
bends. Do not use a
damaged power cable.
Light output power is
reduced to approx 30% when
operating on 110V.
Rev A January 2024
page 31