Table of Contents
Advertisement
Digital Projection Ltd. M-Vision WUXGA Series
3. Mount the projector on top of the other projector.
Ensure that all four pins of the top projector are placed
into the four stacking cups of the bottom projector.
4. Use the provided holding pins to secure each connection.
Rev A January 2024
page 28
POSITIONING THE SCREEN AND PROJECTOR
Notes
Do not stack more than 2
projectors.
Use only the provided
screws with a torque of 25-
30 kgf cm (2.45 - 2.94 Nm).
It is the customer's
responsibility to ensure that
the assembly is carried out
securely.
Installation & Quick Start Guide
Advertisement
Table of Contents
