Table of Contents
Advertisement
Positioning the screen and projector
1.
Install the screen, ensuring that it is in the best position for
viewing by your audience.
2. Mount the projector, ensuring that it is at a suitable distance
from the screen for the image to fill the screen. Set the
adjustable feet so that the projector is level, and perpendicular
to the screen.
The drawing shows the positions of the feet for table mounting,
and the fixing holes for ceiling mounting.
1.
Four adjustable feet
1
.
2. Six M6 holes for ceiling mount
The screws should not penetrate more than 15 mm into the body
of the projector.
Installation & Quick Start Guide
POSITIONING THE SCREEN AND PROJECTOR
2
.
1
2
2
2
1
Digital Projection Ltd. M-Vision WUXGA Series
Notes
Always allow the projector
to cool for 5 minutes before
disconnecting the power or
moving the projector.
Ensure that there is at least
50 cm (19.7 in) of space
between the ventilation
outlets and any wall, and
30 cm (11.8 in) on all other
sides.
1
Do not use the threaded
holes for the adjustable
2
feet to hang or mount the
projector.
2
2
1
Rev A January 2024
page 25
Advertisement
Table of Contents
