USING THE PROJECTOR
Digital Projection Ltd. M-Vision WUXGA Series
Sync offset
Notes
The sync signal from the 3D server will
be in phase with the frames generated
Incoming video
by its graphics card. However, to
compensate for switching delays in the
glasses or ZScreen, Sync Offset is used
to adjust the sync output signal sent to
the ZScreen or 3D glasses to minimise
Incoming sync signal
overlapping (ghosting in the image
when viewed through the 3D glasses).
Video signal with processing delays
(and dark time adjustment)
Sync output signal after
delay adjustments
Operating Guide
Rev A January 2024
page 75