Table of Contents
Advertisement
Stacking
Pin and cup stacking
1.
Remove the four screws on the top side of the projector that will be on
the bottom of the stack.
2. Insert and secure the stacking tops in place of the removed screws.
Installation & Quick Start Guide
POSITIONING THE SCREEN AND PROJECTOR
Digital Projection Ltd. M-Vision WUXGA Series
Notes
The M-Vision series of
projectors can be double
stacked using the optional
accessory: M-Vision Laser
Stacking Kit p/n: 119-073.
Please contact your suppling
dealer or regional sales
representative for further
information.
The projectors must be in
a vertical position when
they are stacked. This will
ensure that the stresses are
distributed to all four corners
of the chassis.
Do not use the threaded
holes for the adjustable
feet to hang or mount the
projector.
Do not use the carry handles
to hang or mount the
projector.
Rev A January 2024
page 27
Advertisement
Table of Contents
