3D Connections; Frame Sequential 1080P 3D Up To 120Hz And Wuxga 3D At 100Hz; Dual Pipe 1080P And Wuxga 3D Sources At Up To 100 And 120Hz - Delta DIJITAL PROJECTION M-Vision 27000WU Installation & Quick Start Manual

Digital Projection Ltd. M-Vision WUXGA Series

3D connections

Sync In / Sync Out
1.
Sync In is the 3D sync input signal. Connect the
3D sync from your graphics card or server.
Sync Out is the 3D sync output signal. Enables
3D from multiple projectors.
2. 3D Sync IR
Sync output signal. This is affected by settings
in the 3D menu such as Dark Time and 3D Sync
Offset. Connect this to an IR emitter or ZScreen.

Frame sequential 1080p 3D up to 120Hz and WUXGA 3D at 100Hz.

1. Set 3D Format in the 3D menu to Frame Sequential.

Dual Pipe 1080p and WUXGA 3D sources at up to 100 and 120Hz

1. Connect the left eye output to the HDMI 1 socket and the right eye output to the HDMI 2 socket.
2. Set 3D Format in the 3D menu to Dual-Pipe.
Rev A January 2024
page 38
3D CONNECTIONS
1
Notes
2
See "3D formats" on page
118 for a complete list of
supported formats and frame
rates.
Connection Guide