Table of Contents
Advertisement
Digital Projection Ltd. M-Vision WUXGA Series
11. LENS adjustment
•
FOCUS IN / OUT: adjust focus.
•
SHIFT: press and hold this button, then use the
Navigation arrow buttons to move the lens.
•
ZOOM IN / OUT: adjust zoom.
12. USER PRESET A, B, C, D
Load user presets.
13. ALT
Press and hold this button to access alternative functions for all buttons with a green
label.
14. DVI / DisplayPort2 / numeric input 3
There is no DVI input on this projector.
Use with ALT to select the DisplayPort 2 input.
15. HDMI 2 / HDMI 4 / numeric input 2
Select the HDMI 2 input.
Use with ALT to select the HDMI 4 input. There is no HDMI 4 input on this projector.
16. HDMI 1 / HDMI 3 / numeric input 1
Select the HDMI 1 input.
Use with ALT to select the HDMI 3 input. There is no HDMI 3 input on this projector.
Rev A January 2024
page 22
REMOTE CONTROL
11
12
Remote Control
Notes
If focus cannot be achieved
using the focus in / out
feature, press Shift & 7 to
adjust for far focus, or Shift &
8 to adjust for near focus.
This projector does not use
the following options on the
remote: DVI, VGA, HDMI 3,
HDMI 4, COMP 1, COMP 2,
PIP and SWAP.
13
14
15
16
Installation & Quick Start Guide
Advertisement
Table of Contents
