Table of Contents
Advertisement
Setup menu
•
Orientation
Choose from Front Tabletop, Front Ceiling, Rear Tabletop, Rear Ceiling and
Auto-front.
•
High Altitude
Choose from Off, On, Auto and Quiet.
•
Standby Mode
Choose from SuperECO, ECO and Normal.
SuperECO uses minimal power and disables power ON via LAN.
ECO uses a low power setting but enables power ON via Ethernet port only.
Normal enables power ON via both HDBase-T/LAN and Ethernet ports.
•
Screen Setting
Choose from Screen Format and Screen Position.
•
ColorMax Setting
Set up user-defined color gamut values.
•
Power On/Off Management
Access the submenu to set up automatic projector power on and power off.
•
Clock Adjust
Access the submenu to set current date and local time.
•
Startup Logo
Choose from Off, Original and User.
Select original to display the Digital Projection Ltd. logo on startup. Select User to display a custom logo. Use the custom logo
upload tool to set the custom logo for the User option.
•
Blank Screen
Choose from Logo, Black, Blue and White.
•
Auto Source
If this setting is On, the projector will automatically search for an active input source.
•
PIC MUTE Setting
Access sub menu to set up the picture mute control.
Highlight the DOWN arrow at the bottom of the page and press ENTER/OK to navigate to the second Setup menu page.
Operating Guide
USING THE PROJECTOR
Setup
Orientation
High Altitude
Standby Mode
Screen Setting
ColorMax Setting
Power on/off Mangement
Clock Adjust
Startup Logo
Blank Screen
Auto Source
PIC MUTESetting
Scroll
Digital Projection Ltd. M-Vision WUXGA Series
Auto-front automatically
Auto-front
detects the projector's
Auto
position and sets Table
Normal
16:10
or Ceiling orientation
accordingly..
Original
Logo
Custom Logo. Please request
Off
the Custom Logo Upload
Tool from your local Digital
Enter
Back
Projection Service provider to
upload a custom logo.
Notes
Rev A January 2024
page 77
Advertisement
Table of Contents
