Table of Contents
Advertisement
Digital Projection Ltd. M-Vision WUXGA Series
3D menu
Use this menu to enable, disable and set up 3D input, as follows:
•
3D Format
Off, Auto, Side by Side, Top and Bottom, Dual Pipe, Frame Sequential
and Frame Packing.
Off: Turn off the 3D Display Mode. When Auto, Side by Side, Top and Bottom,
or Frame Sequential is selected, the 3D Mode will be turned on. To turn off the
3D Mode, select "Off" and press "ENTER".
Auto: Allow the 3D format to automatically detect the formats of Frame Packing,
Top and Bottom, and Side by Side. The input signal is HDMI 1.4b 3D.
Side by Side (Half): This option is only applicable to input signal HDMI 1.4b 3D or
HDMI signal sent by HDBaseT Transmitter.
Top and Bottom: This option is only applicable to input signal HDMI 1.4b 3D or HDMI signal sent by HDBaseT Transmitter.
Dual Pipe is for sources where Left and Right eye are delivered on separate inputs.
Frame Sequential is for sources where Left and Right eye images are delivered as alternate frames from a single input.
Frame Packing: Set input format under Frame Packing.
•
Eye Swap
Normal and Reverse.
(set to Reverse if the left- and right-eye images are displayed in the wrong order)
•
Dark Time
0.65 ms, 1.3 ms and 1.95 ms.
Set to reduce the effect of banding and image overlapping when viewed through 3D glasses.
•
Sync Offset
Use the LEFT and RIGHT arrow buttons to compensate for image overlapping (ghosting) when viewed through 3D glasses.
•
DLP Link
Off and On
DLP Link On emits a sync pulse for the 3D glasses via the projected image.
DLP Link Off will send the sync pulse to the sync out connector to use with an external third party emitter.
•
Sync Reference
External and Internal.
Select the source of the 3D sync. Internal is referenced to the incoming video.
External is for Frame Sequential 3D sources and is supplied by the graphics card or player.
Rev A January 2024
page 72
USING THE PROJECTOR
3D
3D Format
Eye Swap
Dark Time
Sync Offset
DLP Link
Sync Reference
Scroll
If 3D Format is set to Off,
Auto
all other 3D settings will be
Normal
unavailable.
1.95 ms
100
Off
See "3D connections"
External
on page 38 for more
information about supported
3D formats.
Enter
Back
The following settings are not
available when 3D is on:
Image > Brightness, Contrast,
Saturation, Hue, Sharpness,
Noise Reduction, Freeze.
Color > Color Space.
Geometry > Aspect Ratio,
Digital Zoom, Overscan.
Setup > Screen Setting, Auto
Source, Trigger.
Also: See "3D types" on page
73 and See "Some 3D
settings explained" on page
74.
See "3D formats" on page
118 for 3D resolutions and
frame rates.
Notes
Operating Guide
Advertisement
Table of Contents
