Table of Contents
Advertisement
Digital Projection Ltd. M-Vision WUXGA Series
Keystone
Use this setting to compensate for any distortion caused by the projector being in a
different horizontal or vertical plane to the screen.
After correcting for keystone, the aspect ratio of the projected image may be incorrect.
This is dependent upon the throw ratio of the lens at its current zoom setting. Adjust the
lens throw ratio to compensate for the aspect ratio that results from the zoom setting on
the lens.
Keystone example
Rev A January 2024
page 62
USING THE PROJECTOR
The projector is positioned at an angle
Keystone
H Keystone
0
V Keystone
0
Rotation
0
Lens Throw Ratio
2.0
Reset
Scroll
Enter
Back
The resulting image is distorted
The image is corrected when Keystone
is applied
Notes
Max rotation in Keystone is
reduced from normal rotation.
Make sure that the lens
type is set to the correct
lens in the lens menu before
adjusting the lens throw ratio.
Operating Guide
Advertisement
Table of Contents
