Table of Contents
Advertisement
Digital Projection Ltd. M-Vision WUXGA Series
ColorMax
ColorMax permits seven point color matching of red, green, blue, yellow, cyan, magenta and
white.
You can enter your own gamut values here, or edit values you have imported using the
Projector Controller software.
Defining your own colorspace with individual x and y coordinates for each color enables you
to match not only the whites but each individual color as well.
Highlight the submenu you wish to open and press ENTER/OK to confirm your choice.
Measured data/ target data
Use the UP and DOWN arrow buttons to highlight a color, then use the LEFT and
1.
RIGHT arrow buttons to navigate to the x or y coordinate.
2. Use the UP and DOWN arrow buttons to increase and decrease the value,
respectively.
3. Exit edit mode:
•
press ENTER/OK, if you want to save the edited values.
•
press EXIT, if you do not wish to save the edited values.
4. If necessary, highlight another color and repeat the procedure.
Rev A January 2024
page 80
USING THE PROJECTOR
ColorMax
Measured Data
Target Data - User 1
Target Data - User 2
Scroll
Measured Data
Red
Green
Blue
White
Reset
Scroll
Target Data - User 1
Red
Green
Blue
Yellow
Cyan
Magenta
White
Reset
Scroll
The Projector Controller
software is available for
download from the Digital
Projection website, free of
charge.
This tool is best used
in conjunction with a
Enter
Back
specialized light meter (a
photo spectrometer) to
measure color parameters
within a particular installation.
x: 0.658 y:0.339
However, the preloaded
x: 0.315 y: 0.662
x: 0.146 y: 0.043
generic factory default data
x: 0.276 y: 0.283
set is designed to give more
than satisfactory results.
Enter
Back
x: 0.640 y:0.390
x: 0.300 y: 0.600
x: 0.150 y: 0.060
x: 0.419 y: 0.505
x: 0.225 y:0.329
x: 0.321 y: 0. 1 54
x: 0.285 y: 0.302
Enter
Back
Notes
Operating Guide
Advertisement
Table of Contents
