Table of Contents
Advertisement
Digital Projection Ltd. M-Vision WUXGA Series
Edge blend menu
Use this menu to blend together images from an array of two or more projectors. The feature
feathers the light output of the projector within the edges that overlap with other projectors
in the array: as a result, the overlapping edges are evenly lit and easily blend in with the rest
of the image.
•
Edge Blend Mode
Off: Disable Edge Blend
Manual: means manual adjustment.
User Mapping: load the pixel based map data that includes EB, Uniformity and
Masking effect.
•
Align Pattern
Add markers to the image showing the edges of the blend area and making the
overlaps more visible to help adjust the physical position of the projectors in the
array.
•
Blend Start
Determine the start point of the blended regions. top, bottom, left right.
•
Blend Width
Determine the width of the blended regions.
•
Black Level Uplift
Adjust black levels to compensate if the blended regions appear brighter than the rest
of the image.
•
Reset
Reset all Edge Blend settings to their factory default values.
•
Uniformity
Open the Sub-menu for more detailed information.
Rev A January 2024
page 68
USING THE PROJECTOR
Edge Blend
Edge Blend Mode
Align Pattern
Blend Start
Blend Width
Black Level Uplift
Reset
Uniformity
Scroll
When Edge Blend is set to
Off
Off, all other edge blend
Off
settings are disabled.
The picture in the blend
region needs to be delivered
to all overlapping projectors,
which may require a special
setup of the sources.
Enter
Back
See "Uniformity" on page
71
Notes
Operating Guide
Advertisement
Table of Contents
