Keystone settings
1.
Projector to the left The projector is positioned to
the left of the screen. To correct, apply a positive
Horizontal Keystone value using the RIGHT arrow
button.
2. Projector to the right The projector is positioned to
the right of the screen. To correct, apply a negative
Horizontal Keystone value using the LEFT arrow
button.
3. Projector high The projector is positioned above
the screen at a downward angle. To correct, apply
a negative Vertical Keystone value using the DOWN
arrow button.
4. Projector low The projector is positioned below the
screen at an upward angle. To correct, apply a
positive Vertical Keystone value using the UP arrow
button.
5. Projector straight The projector is directly opposite
the screen at a right angle both horizontally and
vertically. No correction is needed.
Operating Guide
Horizontal and vertical keystone corrections
USING THE PROJECTOR
1
3
Horizontal and vertical keystone corrections
Digital Projection Ltd. M-Vision WUXGA Series
2
4
5
Notes
Rev A January 2024
page 63