Table of Contents
Advertisement
Theaterscope setting
The TheaterScope setting is used in combination with an anamorphic lens to restore 2.35: images packed into a 16:9 frame. Such
images are projected with black lines at the top and bottom of the 16:9 screen to make up for the difference in aspect ratios.
Without an anamorphic lens and without the TheaterScope setting applied, a 16:9 source containing a 2.35:1 image looks like this:
If we change the setting to TheaterScope, the black lines will disappear but the image will stretch vertically to reach the top and
bottom of the DMD™:
An anamorphic lens will stretch the image horizontally, restoring the original 2.35 ratio:
Operating Guide
USING THE PROJECTOR
Digital Projection Ltd. M-Vision WUXGA Series
Notes
TheaterScope is used with an
anamorphic lens.
If you use TheaterScope, set
your screen aspect ratio to
16:9.
Rev A January 2024
page 59
Advertisement
Table of Contents
