Table of Contents
Advertisement
3D types
To display a 3D image if is first necessary to select the 3D format. This can either be Frame Sequential or Dual Pipe. These formats are
described below:
•
Dual Pipe (LEFT and RIGHT) The left and right eye images are delivered
on two separate HDMI links, which the projector will interleave for
3D display.
•
Frame Sequential For sequential 3D, an external sync is required to identify
left and right frames. If no sync is available from the sequential source, the
projector will generate an output sync, but it may then be necessary to
manually set the Eye Swap each time the player is started.
Dark Time and Sync Offset need to be set only once, to optimize the image for the
glasses in use.
Operating Guide
USING THE PROJECTOR
Dual Pipe
Sequential
Digital Projection Ltd. M-Vision WUXGA Series
Notes
Rev A January 2024
page 73
Advertisement
Table of Contents
