Table of Contents
Advertisement
Digital Projection Ltd. M-Vision WUXGA Series
Manual color matching
1.
Set Color Mode to Manual Color Matching.
2. Open the Manual Color Matching submenu.
Here you can do the following:
•
Switch Auto Test Pattern On and Off.
•
Adjust Hue, Saturation and Gain settings for each individual color to improve the
color balance of the projected image.
•
Adjust white balance RGB values.
•
Reset all values.
Color matching parameters explained
The levels of hue, saturation and gain in the Manual
Color Matching menu change the color values in the
following ways:
Hue Specifies the position of each color
1.
(red, yellow, green, cyan, blue and magenta)
relative to its neighboring colors.
2. Saturation Specifies the level of white in each
color (i.e. how "pale" each color is).
3. Gain Controls the amount of light that goes
into each color, i.e. the lowest gain would
produce black.
Rev A January 2024
page 56
USING THE PROJECTOR
Manual Color Matching - Red
Hue
100
Saturation
100
Gain
100
Scroll
Enter
Back
Manual Color Matching
Auto Test Pattern
Off
Red
Green
Blue
Yellow
Cyan
Magenta
White Balance
Reset
Scroll
Enter
Back
Manual Color Matching - White
Red
100
Green
100
Blue
100
Scroll
Enter
Back
Notes
Operating Guide
Advertisement
Table of Contents
