Table of Contents
Advertisement
OSD settings
•
Language sets the OSD language.
•
Menu Position determines where the OSD should appear on the screen when
activated.
•
Menu Transparency sets OSD transparency between 0% (no transparency),
25%, 50% and 75%.
•
Time Out determines how long the OSD should remain on screen if no buttons
are pressed. Choose Always On to disable this feature.
•
Message Box determines whether projector status messages should appear on
the screen.
•
Menu Rotation Choose from Off, Clockwise and Counterclockwise. Select a rotation
option to rotate the OSD menu when the projector is displaying in portrait.
Memory
The current image settings can be saved as a preset, which you can recall later.
The default settings can be recalled at any time as well.
Up to four custom presets can be stored for each input.
To recall a saved preset:
•
Select Recall Memory and press ENTER/OK, then select a preset from
Preset A to Preset D. Select Default to load factory default values.
To save a preset:
•
Select Save Settings and press ENTER/OK, then choose from Preset A, Preset B,
Preset C and Preset D.
EDID Mode
Each signal input type is available in the menu. Select the appropriate frame rate and
display resolution for each input.
Operating Guide
USING THE PROJECTOR
OSD Settings
Language
Menu Position
Menu Transparency
Time Out
Message Box
Menu Rotation
Scroll
Memory
Recall Memory
Save Settings
Scroll
EDID Mode
HDMI 1
HDMI 2
DisplayPort1
DisplayPort2
HDBaseT
Scroll
Digital Projection Ltd. M-Vision WUXGA Series
English
Center
0
30 Seconds
On
Off
Enter
Back
Presets from one input
cannot be applied to another
Default
Preset A
input.
See "Appendix C: memory
scheme and memory items"
on page 123 for information
about the parameters that
can be saved in a memory
preset.
Enter
Back
4K/60 HDR
4K/60 HDR
1920×1200xp60
1920×1200xp60
4K/60
Enter
Back
Notes
Rev A January 2024
page 83
Advertisement
Table of Contents
