Table of Contents
Advertisement
Using the projector
Main menu
•
Input
Press ENTER/OK to open this menus and access various settings.
•
Test Pattern
Choose from: Off, White, Black, Red, Green, Blue, Checkerboard, Crosshatch,
Color Bar, Aspect Ratio. Use the LEFT and RIGHT arrow buttons
to switch between values.
•
Lens, Image, Color, Geometry, Edge Blend, 3D, Laser, Setup, Network
and Information.
Press ENTER/OK to open these menus and access various settings.
Input menu
•
Input
Opens a sub-menu, see below.
•
Backup Input Setting
Backup Mode: Use the LEFT and RIGHT arrow buttons to select On or Off.
Backup Input Select: Use the LEFT and RIGHT arrow buttons to select HDMI
or DisplayPort.
•
HDMI Equalizer
Sets a suitable value to maintain the HDMI picture quality in long distance
data transmission
•
Resync
To automatically synchronize the projector to the input source.
Input
Press ENTER/OK to open the list of available inputs.
Use the UP and DOWN arrow buttons to select an input from the list: HDMI1, HDMI2,
DisplayPort1, DisplayPort2, HDBaseT and SDI.
Operating Guide
USING THE PROJECTOR
Main
Input
Test Pattern
Lens
Image
Color
Geometry
Edge Blend
3D
Laser
Setup
Network
Information
Scroll
Input
Input
Backup Input Setting
HDMI Equalizer
Resync
Scroll
Input
Input
Backup Input Setting
HDMI Equalizer
Resync
Scroll
Digital Projection Ltd. M-Vision WUXGA Series
HDMI 1
OK
Enter
EXIT
Back
SDI
Auto
OK
Enter
EXIT
Back
SDI
HDMI 1
HDMI 2
DisplayPort 1
DisplayPort 2
HDBaset
SDI
OK
Enter
EXIT
Back
Notes
See "Signal inputs" on page
36 for information about
the available inputs and
connections.
Selecting a test pattern hides
the OSD. Press EXIT to hide
the test pattern, and then
press MENU to show the
OSD.
Rev A January 2024
page 49
Advertisement
Table of Contents
