Table of Contents
Advertisement
M-Vision 2X000 Series WUXGA
AC Power Precautions
Warning! Death or Serious Injury could occur if the following precautions
are ignored
Shock Hazard! Only use the AC power cord provided or recommended by
the manufacturer
Fire & Shock Hazard! Do not operate the product unless the power cord,
socket and plug meet local rating standards
Do not attempt operation if the AC supply is not within the specified
parameters
The AC power cord must be inserted into a socket with grounding
Disconnect the product from the AC supply before installing, moving,
servicing, cleaning or removing covers
Do not use an AC power cord that appears damaged
Do not overload power sockets or extension cords
The projector can operate at 110V or 200V. Voltage selection is automatic.
Power off the projector before switching power outlets.
Connecting the power supply
1. Firmly push the mains
connector into the AC socket
When the cable is plugged in and the
power supply is on, the projector is
OFF until the power button is switched
to ON.
Use only the power cable provided.
Ensure that the power outlet
includes a ground connection as
this equipment MUST be earthed.
Handle the power cable carefully and avoid sharp bends. Do not use a
damaged power cable.
Rev A December 2023
page 46
1
1
AC Power Precautions
Important Information
Digital Projection Ltd.
Advertisement
Table of Contents
