M-Vision 2X000 Series WUXGA
Positioning the screen and projector
1. Install the screen, ensuring that it is in the best position for viewing by your
audience.
2. Mount the projector, ensuring
that it is at a suitable distance
from the screen for the image
to fill the screen.
The drawing shows the
positions of the mounting
points:
Four adjustable feet
l
for tabletop mount
Set the adjustable feet
so that the projector is
level, and
perpendicular to the
screen.
Six M6 holes for
l
ceiling mount
The mounting screws should not penetrate more than 16 mm into the
body of the projector.
Do not use the threaded holes for the adjustable feet to hang or mount the
projector.
Rev A December 2023
page 40
1
2
2
1
.
2
1
2
.
Positioning the screen and projector
Projector Bottom
Important Information
Digital Projection Ltd.
1
2
2
2
1