25.2.16 Set.factory - Resetting To The Factory Settings - Burkert 8792 Operating Instructions Manual

Type 8792, 8793 Type 8792, 8793
Configuring the auxiliary functions
25.2.16 SET.FACTORY – Resetting to the factory settings
This function allows all settings implemented by the user to be reset to the delivery status.
All EEPROM parameters with the exception of the calibration values are reset to default values. Then a hardware
reset is implemented.
SET.FACTORY
Fig. 77: Operating structure SET.FACTORY
Resetting to the factory settings:
Key Action
MENU Press
/ Select SET.FACTORY
RUN
Press
(until progress bar is closed)
EXIT Press
Table 68: SET.FACTORY; Resetting to the factory settings
To adjust the Type 8792/8793 to the operating parameters, re-implement self-parameterization of the
positioner (X.TUNE).
Hold down as long as countdown
(5 ...) is running
RUN
Description
Switching from process level
for approx. 3 s
(To do this, the auxiliary function must be incorporated into the
main menu).
"factory reset" is shown.
for approx. 3 s
Reset is implemented.
Switching from setting level
factory
reset
setting level.
process level.
english
133