Burkert 8792 Operating Instructions Manual page 130

Key Action
EXIT Press
Table 66: CAL.USER; calibration of position actual value and position set-point value
25.2.15.3. Resetting the settings under CAL.USER to the factory settings
Key Action
MENU
Press
/ Select CAL.USER
ENTER
/ Select copy FACT->USER
RUN
as long as countdown (5 ...) is
running
EXIT Press
EXIT Press
Table 67: copy FACT->USER; resetting the settings under CAL.USER to the factory settings
The factory calibration is re-activated by deactivating CAL.USER, by removing the auxiliary function
from the main menu (MAIN).
132
Description
Switching from setting level
Description
Switching from process level
for approx. 3 s
(To do this, the auxiliary function must be incorporated into the
main menu).
The submenu options are displayed.
The settings of CAL.USER are reset to the factory settings.
Hold down
Acknowledgment and simultaneous return to the main menu
(MAIN).
Switching from setting level
english
Type 8792, 8793 Type 8792, 8793
Configuring the auxiliary functions
process level.
setting level.
process level.