Function Of The Keys - Burkert 8792 Operating Instructions Manual

17.2

Function of the keys

The functions of the 4 operating keys differ depending on the operating state (AUTOMATIC or MANUAL)
and operating level (process level or setting level).
The key function which is active is displayed in the gray text field which is above the key.
The description of the operating levels and operating states can be found in
Chapter "16 Operating levels" and "18 Operating states".
Key function on the process level:
Key Key function
Arrow key
OPN
Arrow key
CLS
Left
MENU
selection key
Right
AUTO
selection key
MANUAL
Key function on the setting level:
Key Key function
Arrow key
Arrow key
Left
EXIT
selection key
ESC
STOP
Right
ENTER
selection key
SELEC
INPUT
EXIT
RUN
STOP
Table 24: Function of the keys
64
Description of the function
Manual opening of the actuator.
(OPEN)
Change the displayed value
(e.g. POS-CMD-TEMP-...).
Manual closing of the actuator.
(CLOSE)
Change the displayed value
(e.g. POS-CMD-TEMP-...).
Change to the setting level.
Note: Press key for approx. 3 s.
Return to AUTOMATIC operating state.
Change to MANUAL operating state.
Description of the function
Scroll up in the menus.
Increase numerical values.
+
Scroll down in the menus.
Decrease numerical values.
–
Change by one digit to the left; when entering numerical values.
< –
Return to the process level.
(BACK)
Gradually return from a submenu option.
Leave a menu.
Stop a sequence.
Select, activate or deactivate a menu option.
OK
Gradually return from a submenu option.
(BACK)
Start a sequence.
Stop a sequence.
english
Type 8792, 8793 Type 8792, 8793
Operating and display elements
Operating state
MANUAL
AUTOMATIC
MANUAL
AUTOMATIC
AUTOMATIC or
MANUAL
MANUAL
AUTOMATIC