Type 8792, 8793
Type 8792, 8793
Attachment and assembly
12.2.3
Attaching mounting bracket
→
Attach mounting bracket
⑪
washers
(see "Fig. 15").
The selection of the M8 thread used on the Type 8792/8793 depends on the size of the actuator.
→
To determine the correct position, hold the Type 8792/8793 with mounting bracket on the actuator.
⑤
The conical roller
on the lever
"Fig. 15") along the entire stroke range of the actuator.
At 50% stroke the lever position should be approximately horizontal (see chapter "12.2.4 Aligning lever
mechanism".
M8 thread
⑨
①
⑩
Fig. 15:
Attaching mounting bracket
Attaching the Type 8792/8793 with mounting bracket for actuators with cast frame:
→
Attach mounting bracket to the cast frame with one or more hexagon bolts
⑩
(see "Fig. 16").
11
1
8
10
Fig. 16:
Attach Type 8792/8793 with mounting bracket; for actuators with cast frame
①
to the back of the Type 8792/8793 with hexagon bolts
⑥
of the position sensor must be able to move freely in the hoop (refer
⑤
⑥
⑪
⑨
Legend:
No.
Name
1
Mounting bracket
5
Conical roller
6
Lever
9
Hexagon bolt
10
Circlip
11
Washer
⑧
, washers
8
10
11
Legend:
No.
Name
1
Mounting bracket
8
Hexagon bolt
10
Circlip
11
Washer
english
⑩
, circlip
and
⑪
and circlips
43