P.co-Init - Smooth Switchover Manual-Automatic - Burkert 8792 Operating Instructions Manual

24.2.5 P.CO-INIT – Smooth switchover MANUAL-AUTOMATIC
The smooth switchover between the MANUAL and AUTOMATIC states can be activated or deactivated in
the P.CO-INIT menu.
Factory default setting:
Operating structure:
P.CO-INIT
ENTER
Fig. 41: Operating structure P.CO-INIT
Procedure:
Key Action
/ Select P.CO-INIT
ENTER
Press
/ Select required function
SELEC
Press
EXIT Press
Table 44: P.CO-INIT; smooth switchover MANUAL-AUTOMATIC
90
bumpless Smooth switchover activated.
bumpless
standard
zeroinit
EXIT
Description
The selection (bumpless) and (standard) is displayed.
bumpless = smooth switchover activated
standard = smooth switchover deactivated
The selection is marked by a filled circle
Return to SETUP.
english
SELEC
Smooth switchover activated
Smooth switchover deactivated
Initialization of process values (CMD) with zero.
Type 8792, 8793 Type 8792, 8793
Basic setting of the process controller
.