Sp-Input - Type Of The Set-Point Value Default (Intern Or Extern); Sp-Scale - Scaling Of The Process Set-Point Value (For External Set-Point Value Default Only) - Burkert 8792 Operating Instructions Manual

24.2.3 SP-INPUT – Type of the set-point value default (intern or extern)
The SP-INPUT menu specifies how the default of the process set-point value is to be implemented.
• Intern:
• Extern:
Operating structure:
SP-INPUT
ENTER
Fig. 39: Operating structure PV-INPUT
Specify type of set-point value default in the menu SETUP → SP-INPUT:
Key Action
/ Select SP-INPUT
ENTER
Press
/ Select the type of set-point
value default
SELEC
Press
EXIT Press
Table 42: SP-INPUT; specifying type of the set-point value default
For internal set-point value default (SP-INPUT → intern), the process set-point value is input directly
on the process level.
24.2.4 SP-SCALE – Scaling of the process set-point value
(for external set-point value default only)
The SP-SCALE menu assigns the values for the lower and upper process set-point value to the particular
current or voltage value of the standard signal.
The menu is available for external set-point value default only (SP-INPUT → extern).
For internal set-point value default (SP-INPUT → internal), there is no scaling of the process set-point
value via SPmin and SPmax.
The set-point value is input directly on the process level. The physical unit and the position of the
decimal point are specified during the scaling of the process actual value (PV-SCALE → PVmin).
For description see Chapter "25.2.2 PV-SCALE – Scaling of the process actual value", page 84
88
Input of the set-point value on the process level
Default of the set-point value via the standard signal input
intern
extern
EXIT
Description
The types of set-point value default are displayed.
The selection is marked by a filled circle
Return to SETUP.
english
SELEC
Set-point value default, intern
Input the process set-point value on the process
level
Set-point value default, extern
Default of the process set-point value via the
standard signal input
Type 8792, 8793 Type 8792, 8793
Basic setting of the process controller
.