Burkert 8792 Operating Instructions Manual page 140

CONTROL.sim – Simulation of the process and process valve
25.2.21.2.
The settings to simulate the process and the process valve are made in the CONTROL.sim menu.
Settings
Type of simulation:
Parameterization of
the process:
Example of a simulated process:
SIM.Gain
(Amplification factor [Kp])
Fig. 82: Example of a simulated process. Behavior of the PT1 element
Activating and parameterizing simulation of the process and/or process valve:
Key Action
MENU Press
/ Select SIMULATION
ENTER
Press
/ Select CONTROL.sim
ENTER
Press
142
Simulation of the process valve.
x.SIM
Simulation of the process.
p.SIM
Specify amplification factor.
SIM.Gain
Specify time constant in seconds.
SIM.Delay
Effect of parameterization on the behavior of the PT1 element
SIM.Delay (Time constant [T] in s)
5
63 %
1
Description
Switching from process level
for approx. 3 s
(To do this, the auxiliary function must be incorporated into the
main menu).
The submenu for setting the simulation is displayed.
The submenu for activating and parameterizing the process and
process valve simulation is displayed.
english
Type 8792, 8793 Type 8792, 8793
Configuring the auxiliary functions
Output of the simulated
process
y
Input of the simulated
process
u
t
setting level.