Burkert 8792 Operating Instructions Manual page 115

Type 8792, 8793 Type 8792, 8793
Configuring the auxiliary functions
Setting the code protection:
Key Action
MENU Press
/ Select SECURITY
ENTER
Press
/
Select decimal place
Increase number
OK
Press
/ Select CODE
INPUT
Press
/
Select decimal place
Increase number
OK
Press
/ select
SELEC
Press
EXIT Press
EXIT Press
Table 56: SECURITY; setting code protection
The changed data is saved in the memory (EEPROM) only when there is a switch to the process
level, by leaving the main menu (MAIN) using the left selection key
the save symbol is indicated
* If you have forgotten the set code:
All operator actions can be implemented with the non-changeable master code. This 4-digit master
code can be found in the printed brief instructions for Type 8792/8793.
Description
Switching from process level
for approx. 3 s
(To do this, the auxiliary function must be incorporated into the
main menu).
The input screen for the access code (Access Code) is
displayed.
Enter code.
For the first setting: Access Code 0000 (factory settings)
For activated code protection: Access Code from the user *
The submenu of SECURITY is opened.
The input screen for specifying the access code (Access Code)
is displayed.
Enter required access code.
Acknowledgment and return to the SECURITY menu.
Selector operator actions to which the code protection is to
apply.
Activate code protection by checking the box
Acknowledgment and simultaneous return to the main menu
(MAIN).
Switching from setting level
on the display.
setting level.
.
process level.
. During the save process,
EXIT
english
117