Burkert 8792 Operating Instructions Manual page 85

Type 8792, 8793 Type 8792, 8793
Basic setting of the process controller
Key Action
3. Setting K-factor (only available for frequency signal type)
/ Select K-factor
ENTER
Press
either
/ Select VALUE
INPUT
Press
<–
/ <–
OK
Press
or
/ Select TEACH-IN
ENTER
Press
START
Press
STOP
Press
<–
/ <–
OK
Press
EXIT
Press
EXIT
Press
EXIT
Press
Table 41: PV-SCALE; scaling process actual value
If the submenu is left by pressing the left selection key
Description
The submenu for the setting of the K-factor is displayed.
Manual input of the K-factor.
The input screen is opened. The decimal point has a dark
background.
Specify position of the decimal point.
Select decimal point
The last digit of the value has a dark background.
Select value
Set K-factor.
Select decimal place
Increase value
Return to K-factor.
Calculating the K-factor by measuring a specific flow rate.
The valve is being closed.
for approx. 5 s
The container is being filled.
The measured volume is displayed and the input screen is
opened. The decimal point has a dark background.
Specify position of the decimal point.
Select decimal point
The last digit of the value has a dark background.
Select value
Set the measured volume.
Select decimal place
Increase value
Return to TEACH-IN.
Return to K-factor.
Return to PV-SCALE.
Return to SETUP.
, the value remains unchanged.
ESC
english
87