Burkert 8792 Operating Instructions Manual page 151

Type 8792, 8793 Type 8792, 8793
Configuring the auxiliary functions
Starting, stopping and deleting the histograms
Key Action
/ Select HISTOGRAM
ENTER
Press
Starting histograms:
*
START Hold down
as long as countdown (5 ...) is
running
/ Changing the display view
Stopping histograms:
STOP *
Hold down
as long as countdown (5 ...) is
running
/ Changing the display view
Deleting histograms:
*
CLEAR
Hold down
as long as countdown (5 ...) is
running
Return to the DIAGNOSE main menu:
/ Select SYSTEM DATA
EXIT
Press
* The key functions START
POS class and DIR class.
Table 83: HISTOGRAM; starting, stopping and deleting histograms
Description
(To do this, the HISTOGRAM function must be incorporated into
the DIAGNOSE main menu. See Chapter "26.2.22.4. Activation
of diagnosis functions").
The empty matrix of the POS-Class submenu (dwell time
density) is displayed.
Both histograms (POS class and DIR class) are started.
Selection options:
POS class (Histogram for the dwell time density),
DIR class (Histogram for the movement range),
SYSTEM DATA (list of the characteristic values).
The recording of both histograms (POS class and DIR class) is
stopped.
Selection options:
POS class (Histogram for the dwell time density),
DIR class (Histogram for the movement range),
SYSTEM DATA (list of the characteristic values).
Both histograms (POS class and DIR class) are deleted.
Return to the DIAGNOSE main menu.
or
, STOP and CLEAR are available only in the display views of the histograms
english
153