Setting Up And Running A Worklist - Agilent Technologies Revident LC/Q-TOF System User Manual

4 Basic Operation

Setting Up and Running a Worklist

Setting Up and Running a Worklist

1 Click Worklist to show the Worklist window.
2 Click Add Multiple Samples
3 Enter all the information on the Sample Information tab.
4 On the Sample Position tab, specify the sample vial locations (make sure the
76
specific sample tray type has been configured by right-clicking the
autosampler device image).
. The Add Multiple Samples dialog box opens.
Agilent Revident LC/Q-TOF System User Guide