Agilent Technologies Revident LC/Q-TOF System User Manual page 74

4 Basic Operation
Setting Up an Acquisition Method
7 Optional. On the Properties tab, set up the properties for this method.
8 Save the method.
74
a Click Save or
b If the Audit Trail Settings in Control Panel are set to prompt for a reason
when the method is saved, enter the Reason for creating a new version of
this method. Refer to the MassHunter Control Panel online Help for more
information. Click OK.
c If necessary, name the method and click OK.
Save As.
Agilent Revident LC/Q-TOF System User Guide