Agilent Technologies Revident LC/Q-TOF System User Manual page 56

4 Basic Operation
MassHunter Data Acquisition Windows
1 In the Chromatogram Plot window, right-click the Chromatogram Plot
2 Select the signal to monitor and set the X and Y range for the plot.
To add other MS signals, such as EICs, setpoints, and actuals, select these on the
NOTE
Q-TOF
3 Click OK to close the Edit Signal Plot dialog box.
Spectrum window
This window displays the spectral plot in real time. Additional tabs are displayed
for other modules.
56
window, and select Change. The Edit Signal Plot dialog box opens.
tab in the Method Editor window.
Agilent Revident LC/Q-TOF System User Guide