Agilent Technologies Revident LC/Q-TOF System User Manual page 78

4 Basic Operation
Setting Up and Running a Worklist
8 Optional. On the Additional Parameters tab, enter a comment, and click OK.
9 To start the worklist, click
To use an acquisition method that has a different data analysis (DA) method
NOTE
than the method entered in the worklist, show the column called Override DA
Method in the worklist by using the Show/Hide/Order Columns dialog box. In
this column, browse for and select the method containing the DA parameters you
want to use for the sample. The DA part of this method is used instead of the DA
part of the current method.
Or, select this method in the Add Multiple Samples dialog box.
78
Run Worklist.
Agilent Revident LC/Q-TOF System User Guide