Agilent Technologies Revident LC/Q-TOF System User Manual page 72

4 Basic Operation
Setting Up an Acquisition Method
6 Set up the data analysis (DA) parameters.
72
b Select TIC or EIC under the Chromatograph column and the MS or MS/MS
under the MS level column, and type other plot values.
A method can contain Qualitative Analysis parameters, Quantitative Analysis
parameters, or a combination. The Qual Automation check box is marked on
the Qual tab and the Quant Automation check box is marked on the Quant
tab.
a Select the DA tab.
b Optional. For information on the Data Conversions tab, refer to the online
Help.
Agilent Revident LC/Q-TOF System User Guide