Diagnostic Tune - Agilent Technologies Revident LC/Q-TOF System User Manual

3 Tuning

Diagnostic Tune

Diagnostic Tune

Diagnostic tunes should only be performed at the request of Agilent service
personnel. During normal operation, a diagnostic tune will last approximately 3
hours and creates a log file.
1 In the Method Editor window, click the MS Q-TOF tab.
2 Click Tune > Diagnostic tune in the left pane.
3 Click
4 Click
5 In MassHunter Control Panel, navigate to the Control Panel > Administration
42
Tune control in the toolbar to lock control of the instrument.
Diagnostic Tune to start a diagnostic tune.
The Progress bar and Tune status window displays the progress and status of
the tune.
> Diagnostics page.
The log is named: YYY-MM-DD-h-m-sec-MSR.zip
Agilent Revident LC/Q-TOF System User Guide