Agilent Technologies Revident LC/Q-TOF System User Manual page 54

4 Basic Operation
MassHunter Data Acquisition Windows
At least one window must be shown.
NOTE
• To obtain help on the active window, click in a window and Press F1.
• To resize the window, drag a window border.
• To "float" the window outside of the main window, double-click the title of the
Instrument Status window
This window displays the status of each device configured with the instrument:
Error, Not ready, Pre-run, Post run, Running, Injecting, Idle, Offline, or Standby.
You also set non-method control and configuration parameters for the LC
devices and the MS instrument.
This window displays the status of each device both as text and by its
color-coding. See
Actuals window
This window displays the current value of selected instrument parameters. See
"Set up to view real-time parameter values (actuals)."
information.
54
window. Double-click the title bar again to "dock" the window.
"Instrument Status Indicators in Acquisition"
Agilent Revident LC/Q-TOF System User Guide
on page 23.
on page 60 for more