Agilent Technologies Revident LC/Q-TOF System User Manual page 73

4 Basic Operation
Setting Up an Acquisition Method
Agilent Revident LC/Q-TOF System User Guide
c Optional. On the Qual tab, mark the Qual Automation check box. The name
of the current Qualitative Analysis method is shown in the box. If you want
to change the Qualitative Analysis method that is connected, click browse
to select a different method. When the acquisition method is saved, the
Qualitative Analysis method that you selected is copied or linked to the
acquisition method.
d Optional. On the Quant tab, mark the Quant Automation check box. The
name of the current Quantitative Analysis method is shown in the list. If
you want to change the Quantitative Analysis method that is connected,
click Browse to select a different method. When the acquisition method
is saved, the Quantitative Analysis method that was selected is copied or
linked to the acquisition method.
e Optional. Mark the Generate Report check box on the Quant tab. Then, you
select the Method Path/Template File to use. If you want to print the
report, mark the Print to default printer check box. Mark the Publish check
box to create a CSV file, a TXT file, or a PDF file.
73