Agilent Technologies Revident LC/Q-TOF System User Manual page 62

4 Basic Operation
Preparing the LC Modules
NOTE
NOTE
5 Set up real-time plot displays.
62
g Set a conditional formatting range for the parameters that are numbers.
If the value of the parameter is not within the limits you entered, then the
background of the parameter is set to red.
h Click OK when you finish selecting parameters.
The parameters you selected appear in the Actuals window. Note that the
customizations you have made will remain, even if you close the
Acquisition software and reopen it.
As the column is conditioning, set up the displays to monitor the effluent.
a In the Chromatogram Plots window, right-click the chromatogram plot, and
select Change.
Agilent Revident LC/Q-TOF System User Guide