Checktune - Agilent Technologies Revident LC/Q-TOF System User Manual

3 Tuning

Checktune

Checktune

A checktune is used to determine whether the instrument is correctly tuned by
applying the current tune parameters to the source, quadrupole, and detector to
confirm the signal intensity and resolution is within expectation. A checktune can
be run with the following ion sources: ESI, AJS ESI, and APCI.
Only the active instrument mode can be calibrated.
NOTE
1 In the Method Editor window, click the MS Q-TOF tab.
2 Click Tune > Mass Calibration in the left pane.
3 Click
4 Select Checktune.
36
Tune control.
Agilent Revident LC/Q-TOF System User Guide