Use the SNMP Menu to display or configure the Industrial Managed PoE+ Switch 's SNMP function. This section has the
following items:
System Configuration
System Information
SNMP Trap Configuration
Trap Source Configuration
SNMPv3 Communities
SNMPv3 Users
SNMPv3 Groups
SNMPv3 Views
SNMPv3 Access
4.2.2.2 SNMP System Configuration
Configure SNMP on this page. The SNMP System Configuration screen in
The page includes the following fields:
Object
•
Mode
•
Engine ID
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
Configure SNMP on this page.
The system information is provided here.
Configure SNMP trap on this page.
Configure SNMP Trap source on this page.
Configure SNMPv3 communities table on this page.
Configure SNMPv3 users table on this page.
Configure SNMPv3 groups table on this page.
Configure SNMPv3 views table on this page.
Configure SNMPv3 accesses table on this page.
Figure 4-2-2-2: SNMP System Configuration Page Screenshot
Description
Indicates the SNMP mode operation. Possible modes are:
Enabled: Enable SNMP mode operation.
Disabled: Disable SNMP mode operation.
Indicates the SNMPv3 engine ID. The string must contain an even number
between 10 and 64 hexadecimal digits, but all-zeros and all-'F's are not allowed.
Change of the Engine ID will clear all original local users.
User's Manual of IGS-10020HPT-U
Figure 4-2-2-2
81
appears.