Permobil F5 Corpus VS User Manual
  1. Manuals
  2. Brands
  3. Permobil Manuals
  4. Wheelchair
  5. F5 Corpus VS
  6. User manual

Permobil F5 Corpus VS User Manual

Hide thumbs Also See for F5 Corpus VS:
Table of Contents

Advertisement

Quick Links

F5 Corpus VS
|
User manual
American English

Advertisement

Table of Contents
loading

Related Manuals for Permobil F5 Corpus VS

Summary of Contents for Permobil F5 Corpus VS

  • Page 1 F5 Corpus VS User manual American English...
  • Page 2 Welcome to the Permobil family We hope that you enjoy your new power wheelchair. Permobil Inc. Permobil's founder, Dr. Per Uddén, believed that every person 300 Duke Drive has the right to have his or her disability compensated as far as...

  • Page 3: Table Of Contents

    Introduction 4.9.1 Headrest 4.9.2 Headrest with link hardware Overview 4.9.3 Removing the backrest 4.9.4 Armrest Wheelchair specification 4.9.5 Footplates Tool bag 4.9.6 Lumbar support General control panel 4.9.7 Trunk support Omni2 4.9.8 Chest support Connected wheelchair 4.9.9 Knee support Lights and reflectors 4.9.10 Rotational panel holder 4.9.11...

  • Page 4: Introduction

    It instructs you on how to properly and safely use and care for your wheelchair. This user manual and additional information concerning our products are available at www.permobil.com or by telephone. Your power wheelchair is a complex medical device prescribed to you by your healthcare provider and configured to meet your needs.

  • Page 5: Overview

    The parts on the overview image are described in more detail throughout the manual. The F5 Corpus VS is a front-wheel drive power wheelchair for outdoor and indoor driving. It has a standing function. It is intended for people limited to a seated position.

  • Page 6: Wheelchair Specification

    Wheelchair specification F5 Corpus VS Product name: Wheelchair class: Sitting position Height: 1090–1170 mm (43"–46") Width: 650–790 mm (25.5"–31") Length: 1165 mm (46") Standing position Height: 1920 mm (76") Width: 790 mm (31") Length: 1260 mm (50") Smallest transportation size Height: 825–875 mm (32.5"–34.5")

  • Page 7: Tool Bag

    Tool bag The wheelchair comes with a tool bag for maintenance and adjustments. It contains the following tools: Wrench general maintenance 11 mm 13 mm Allen keys general maintenance and seat adjustment 2–6 mm Socket wrench general maintenance 15 mm Overview - 7...

  • Page 8: General Control Panel

    General control panel Joystick Example of button functions A. On/off B. Horn C. Decrease maximum speed D. Increase maximum speed For more information, see the user manual of your control panel: https://documentation.permobil.com/ manuals/control_panels/ 8 - Overview...

  • Page 9: Omni2

    Omni2 Your wheelchair can be equipped with an Omni2. An Omni2 is a device that makes it possible to operate the wheelchair with something other than a standard joystick. Button configuration for Omni2. A. On/off E. LCD screen B. Profile F.

  • Page 10: Connected Wheelchair

    Connected wheelchair ConnectMe contains a radio transmitter. In certain areas, radio transmission is not allowed and ConnectMe must be set to flight mode For more information, see the user manual of your control panel: https://documentation.permobil.com/ manuals/control_panels/ 10 - Overview...

  • Page 11: Lights And Reflectors

    Front reflectors Rear reflectors If the wheelchair is equipped with lights, Permobil recommends that you use them whenever you drive near public rights of way. Do not drive in the dark unless your wheelchair is equipped with lights. When you drive in the dark, be extra cautious.

  • Page 12: Wheels

    Wheels The wheelchair drive wheels have pneumatic tires or flat-free (foam filled) tires. The caster wheels have pneumatic tires or solid polyurethane tires. Pneumatic tires Flat-free (foam filled) tires Inflating the pneumatic tires. See page 69. 12 - Overview...

  • Page 13: Tie-Down Points

    Tie-down points The wheelchair is equipped with four tie-down points used for transportation . Two in the front and two in the rear Vehicle transportation. See page 38. Overview - 13...

  • Page 14: Serial Number Label

    Serial number label The serial number label is located on the lower, left side of the wheelchair chassis. An additional serial number label is located on the seat lift. You may need to lift the seat for better visibility. The contents of the serial number label are described on page 27.

  • Page 15: Accessories

    2.10 Accessories Accessories for Permobil products are subject to continuous development. Contact your nearest Permobil dealer for more information on the accessories available for your product. Only use accessories that are authorized by Permobil. Overview - 15...

  • Page 16: Spare Parts

    2.11 Spare parts Spare parts must be ordered through your dealer. Only use spare parts that are authorized by Permobil. 16 - Overview...

  • Page 17: User Manual

    2.12 User manual Main text area Main illustration area Text correlates to the illustration to the right Tool list Instruction steps Warning sign Chapter and page number Overview - 17...

  • Page 18: Safety

    This chapter contains important information about how Indicates important information. to safely use your wheelchair. Permobil is not responsible for personal injuries or property Warning signs damage resulting from any person’s failure to follow the warnings and instructions in this manual or from failure to WARNING! Do not overload the exercise good judgment.
  • Page 19 WARNING! Avoid steep slopes WARNING! Drive extra carefully when lifted or tilted Do not drive the wheelchair on slopes steeper than 10°. If you do, the wheelchair can become less stable and injure you. For If the seat or backrest is lifted or tilted on flat ground, drive at a maximum performance and stability, use caution on slopes low speed.
  • Page 20 Permobil as soon as possible and immediately stop using your wheelchair. There is a risk IMPORTANT! Armrest falling rearward that the wheelchair or its accessories can no longer be used safely.
  • Page 21 WARNING! Use the recommended tire lead to significant damage that is impossible to detect upon pressure inspection. Contact your service provider or Permobil. Damage caused by these types of incidents exceeds the Use the recommended tire pressure. Incorrect tire pressure limits covered by the manufacturer’s warranty.
  • Page 22 WARNING! Do not use on stairs or WARNING! Do not turn off power to stop escalators the wheelchair Do not use your wheelchair on stairs or escalators. If you do, it Release the joystick to stop the wheelchair. Do not turn of the can lead to personal injury or property damage.
  • Page 23 Make sure that you take great care when you transfer into and Permobil recommends that you do not use the wheelchair in out of the wheelchair and always follow your caregiver’s recommendations for transfer. If you do not, you can get extreme conditions, such as heavy rain, thick snow, or injured.
  • Page 24 Do not remove labels from the wheelchair. They contain spaces. information about safety and proper use. If a label becomes difficult to read or falls off, order a replacement from Permobil. WARNING! Drive carefully when there are ridges WARNING! Place feet correctly and...
  • Page 25 WARNING! Only use intended charger The wheelchair must only be transported in vehicles approved Only use a Permobil charger intended for use with your for transporting wheelchairs. wheelchair. If you use a different charger, there is a risk of fire or explosion which can lead to bodily injury or property damage.

  • Page 26: Contraindications

    Do not use the joystick or armrests as support when you and repairs must be carried out by a qualified service transfer in or out of the wheelchair. If you do, it can lead to technician authorized by Permobil. bodily injury or damage to the wheelchair. Contraindications...

  • Page 27: Labels

    GTIN - global trade item number, date of manufacture, and serial number XXXXXXXXXXXX XX kg / XX lb Model: XXXXXX Name and Model version: XXXXXX address of the XXXXXX: XXXXXX manufacturer HVIN: XXXXXX YYYY-MM-DD Patent: www.permobil.com/patents (01)XXXXXXXXXXX (11)YYMMDD (21)XXXXXXXXXX Safety - 27...
  • Page 28 Warning Freewheel mode The picture above the arrows indicates that the wheelchair is This label indicates that special attention is required. not in freewheel mode. The pictures below the arrows indicate that the wheelchair is in freewheel mode. Read more about freewheel mode on page 38.

  • Page 29: Wheelchair Usage

    To drive your wheelchair, you must first turn on the power. The power button or switch is most commonly located on the wheelchair’s control panel, which is usually attached to the armrest. Most Permobil wheelchairs also include a joystick on the control panel. Use this joystick to turn the wheelchair and to drive forward and rearward.
  • Page 30 Permobil recommends that you do not use the wheelchair in extreme conditions, such as heavy rain, thick snow, or excessive heat or cold. The driving range of your wheelchair is approximately 25 km (16 mi) when the battery temperature is 25°C (77°F).

  • Page 31: Seat Functions

    Your wheelchair can have seat functions. A seat function is a power adjustment. Due to the custom nature of Permobil products, your wheelchair is equipped with one of numerous different ways to adjust its seat functions. For additional information on how to control your wheelchair, refer to any other documentation received with your wheelchair or contact your Permobil dealer.
  • Page 32 Permobil offers the following seat functions. Available functions can vary depending on the equipment fitted on your wheelchair. • seat lift • seat tilt • standing function • backrest tilt • leg rest tilt • footplate lift The wheelchair’s center of gravity changes when you change the position of the seat and/or the backrest.
  • Page 33 4.2.1 Seat lift The seat lift lifts and lowers the seat. When the seat is lifted, the maximum speed of the wheelchair can be reduced automatically or the ability to drive the wheelchair can be restricted completely. The reduced maximum speed can be indicated with a turtle on the display of the control panel, and the drive restriction can be indicated with a red light.
  • Page 34 4.2.3 Standing function The standing function makes it possible for you to stand up in the wheelchair. When you stand up, the maximum speed of the wheelchair is reduced automatically. This can be indicated with a turtle on the display of the control panel.
  • Page 35 4.2.4 Backrest tilt The backrest tilt tilts the backrest rearward and back up again. When the backrest is tilted, the maximum speed of the wheelchair can be reduced automatically or the ability to drive the wheelchair can be restricted completely. The reduced maximum speed can be indicated with a turtle on the display of the control panel and by a yellow light on the switch box.
  • Page 36 4.2.6 Footplate lift The footplate lift shortens or lengthens the leg rests to adjust the height of the footplates. You can use this function to adjust the pressure on the back of your thighs. 36 - Wheelchair usage...

  • Page 37: Charging The Batteries

    Charging the batteries You can charge your wheelchair from the control panel. The charger socket is located at the front of the joystick. WARNING! Always follow charging instructions Always connect the charger to the wheelchair first before you connect the charger to the wall.

  • Page 38: Freewheel Mode

    Freewheel mode The wheelchair is fitted with two freewheel levers. When the freewheel levers are released, the wheelchair’s brakes are disengaged from the motor. When in freewheel mode, the wheelchair can be moved manually, but cannot be controlled electronically. WARNING! Use freewheel mode cautiously 4.4.1 Entering freewheel mode 1.
  • Page 39 4.5.1 Securing the wheelchair in a vehicle This chapter describes how you secure the wheelchair in a vehicle. You must either secure the wheelchair at its tie-down points or use a docking system that complies with ISO 10542–1:2012, which is an international standard that governs wheelchair tie-downs and occupant-restraint systems.
  • Page 40 4.5.2 Using the wheelchair as a seat in a vehicle Permobil recommends that you transfer to a vehicle seat and that you use the vehicle’s restraint systems. The unoccupied wheelchair should be stored in a cargo area or secured in the vehicle during travel. Follow the instructions below if you want to use the wheelchair as a seat in a vehicle.

  • Page 41: Air Transportation

    You must use both pelvic-belt restraints and shoulder-belt restraints. Make sure that the belt restraints are as tight as possible, without becoming uncomfortable, and that they are not twisted. They must be close to your body and not held away by parts of the wheelchair. Adjust your restraint system such that the release mechanisms cannot be pressed during a crash.
  • Page 42 4.6.1 Batteries The main circuit breaker must always be in the off position. In most cases, gel batteries do not have to be removed from the wheelchair. 4.6.2 Weight and dimensions Contact the relevant airline for applicable rules on weight and dimensions for your power wheelchair.

  • Page 43: Main Circuit Breaker

    Main circuit breaker Your wheelchair has a main circuit breaker with two functions. You can use it to turn off the main power, for example before you transport the wheelchair. It also trips if there are any issues with the circuits. The first time the main circuit breaker trips, you can reset it yourself.

  • Page 44: Manual Adjustments

    When you store it for a long time, fully charge the batteries before storage. Remember to switch off the main circuit breaker. Charge the batteries every month. You will need to switch on the main circuit breaker to charge the batteries, then switch off the main circuit breaker if the wheelchair is to remain in storage.
  • Page 45 This is how you adjust the height and depth of the headrest. 1. Loosen handle on the backrest. 2. Adjust the height or depth as required. 3. Tighten handle This is how you adjust the angle of the headrest. 1. Loosen handle on the rear of the headrest.

  • Page 46: Headrest With Link Hardware

    This is how you remove and install the headrest. 1. Loosen handle on the backrest. 2. Lift the headrest straight up. Install the headrest in the reverse order. You can remove and install the headrest without affecting current settings. 4.9.2 Headrest with link hardware This chapter shows you how to adjust the height, depth, and angle of the headrest.
  • Page 47 This is how you adjust the height and depth of the headrest. Allen key 5 mm 1. Loosen the screw at each link 2. Change the angle of the links as required. 3. Tighten the screws. This is how you adjust the angle of the headrest. Allen key 5 mm 1.
  • Page 48 This is how you remove and install the headrest. 1. Loosen handle at the rear of the backrest. 2. Lift the headrest straight up ( ). Install in the reverse order. You can remove and install the headrest without affecting current settings. 48 - Wheelchair usage...

  • Page 49: Removing The Backrest

    4.9.3 Removing the backrest You can remove the backrest to make transportation of the wheelchair easier. Do not place any weight on the backrest while you adjust it. First, remove backrest cushion . It is attached with Velcro. Then carefully undo clip on the backrest and pull the upper part of the backrest straight up ( ).
  • Page 50 4.9.4.1 Swiveling armrest This chapter describes how you adjust a swiveling armrest. A swiveling armrest is an armrest that you can push in or out as preferred between certain settings. There are three swivel settings ( , , and ) and one locked setting ( ).
  • Page 51 4.9.4.2 Armrest height and armrest angles This chapter shows you how to adjust the height of the armrest and the angles of the armrest. There are two ways to adjust the armrest angle. This is how you adjust the height of the armrest. You can see the current height of the armrest on the backrest.
  • Page 52 This is one way to adjust the angle of the armrest. The lower lock nut has a left-hand thread. Wrench 14 mm 1. Loosen the two lock nuts on adjustment bar 2. Turn the adjustment bars to adjust the armrest angle to the preferred position.
  • Page 53 This is the other way to adjust the angle of the armrest. Allen key 5 mm 1. Move the screw from fixed position to flexible position 2. Adjust the armrest angle to the preferred position. 3. Tighten screw Wheelchair usage - 53...

  • Page 54: Footplates

    4.9.5 Footplates You can adjust the height and the angle of the footplates. This is how you adjust the height of the footplates. You can adjust the footplates separately if you prefer them at different heights. Allen key 5 mm 1.

  • Page 55: Lumbar Support

    4.9.6 Lumbar support This chapter shows you how to adjust the lumbar support. The lumbar support consists of three cushions with Velcro. If you want to adjust it, simply remove the backrest cushion and adjust the lumbar support as preferred. Wheelchair usage - 55...

  • Page 56: Trunk Support

    4.9.7 Trunk support This chapter shows you how to adjust the height of the trunk support. This is how you adjust the height of the trunk support. Allen key 5 mm 1. Remove the backrest cushion. 2. Loosen screw on the backrest that holds the trunk support in place. 3.

  • Page 57: Chest Support

    4.9.8 Chest support You can adjust the height and the depth of the chest support. This is how you adjust height of the chest support. Allen key 3 mm 1. Loosen screws on the locking ring on either side of the chest support. 2.

  • Page 58: Knee Support

    4.9.9 Knee support This chapter shows you how to remove and attach the knee support. All adjustments of the knee support must be made by an authorized service technician. You can remove the knee support from the leg rest to make it easier to get in and out of the wheelchair.

  • Page 59: 4.9.10 Rotational Panel Holder

    4.9.10 Rotational panel holder You can adjust the distance between the armrest and the control panel, the resistance of the rotational panel holder, and the angle of the rotational panel holder. This is how you adjust the distance between the armrest and the control panel.
  • Page 60 You can angle the rotational control panel to either side. This is how you adjust the angle. Allen key 4 mm 1. Remove screw on the side you want to angle. 2. Loosen the other screw 3. Adjust the angle of panel to the preferred position.

  • Page 61: 4.9.11 Parallel Panel Holder

    4.9.11 Parallel panel holder You can adjust the distance between the armrest and the control panel. It is also possible to adjust the angle of the control panel. This is how you adjust the distance between the armrest and the control panel.
  • Page 62 This is how you adjust the angle of the control panel. Allen key 4 mm Slide the panel to the preferred position. You can loosen or tighten screw to adjust the resistance. 62 - Wheelchair usage...

  • Page 63: 4.9.12 Positioning Belt

    4.9.12 Positioning belt Always wear your positioning belt. There is an accessory rail on each side of the seat frame where you can attach for example a positioning belt. Wrench 10 mm 1. Screw the positioning belt in place in the rail’s upper groove. 2.

  • Page 64: Maintenance

    Only carry out maintenance and minor adjustments that are specified in the user manual. All other maintenance, service, and repairs must be carried out by a qualified service technician authorized by Permobil. CAUTION! Qualified service technician...

  • Page 65: Maintenance And Inspection Schedule

    Maintenance and inspection schedule Permobil recommends compliance with the following maintenance and inspection schedule. Contact your authorized dealer for all service-related needs or questions. Maintenance and inspection schedule Daily Weekly Monthly Yearly Check battery level indicator and charge the wheelchair if necessary.
  • Page 66 Maintenance and inspection schedule Daily Weekly Monthly Yearly Check that the freewheel mode and the freewheel lever work properly. Complete inspection, safety check, and service performed by an authorized wheelchair dealer. 66 - Maintenance...

  • Page 67: Cleaning

    Cleaning Regular care and maintenance will prevent unnecessary wear and damage to your Permobil product. CAUTION! Always turn off the power before cleaning the wheelchair 5.2.1 Metal surfaces Due to the high quality powder coating, optimum corrosion protection is guaranteed. Ideally, use a soft cloth or sponge, hot water, and a mild detergent for normal cleaning.
  • Page 68 5.2.3 Upholstery, cloth, and vinyl For normal cleaning, wash the upholstery with lukewarm water and a mild, non-abrasive soap. Use a soft cloth or brush. Wipe off any water or soapy water residues with a clean, dry cloth. Let the surface dry. Repeat this procedure to remove stubborn dirt or stains.

  • Page 69: Inflating The Drive Wheel Tires

    Inflating the drive wheel tires Only drive the wheelchair with the correct tire pressure. The tire pressure for the drive wheel tires is 250 kPa (35 psi). Permobil recommends that you check the tire pressure weekly and after any significant change in temperature or altitude.

  • Page 70: Restrictions And Limitations

    Restrictions and limitations This chapter contains information about seat depth. Users above 110 kg (240 lb.) must have a seat depth of 445 mm (17") or more. If your wheelchair has a seat depth of less than 445 mm (17") and your weight increases to more than 110 kg (240 lb.), contact your service technician.

  • Page 71: Troubleshooting

    Note that the guide cannot describe all the problems and events which may occur and you should always contact your service provider or Permobil technical support if you need additional assistance. Troubleshooting and repairs of electronics must always be performed by qualified personnel with good knowledge of the wheelchair’s electronics.
  • Page 72 Possible cause Remedy Event The battery charger is connected. Disconnect the battery charger. The wheelchair is in freewheel mode. Exit freewheel mode and restart the wheelchair. The wheelchair is locked. Unlock the wheelchair. The wheelchair cannot be driven. A seat function has triggered the Make sure that the backrest and the leg automatic drive inhibit.

  • Page 73: General Information

    This chapter contains information about warranty, standards and regulations, reporting incidents, scrapping, and technical specifications. Warranty Contact your dealer or Permobil Inc. USA for information about the warranty period for this product. Product Warranty Information sets forth the conditions of the warranty. For further information about applicable warranties, see https://permobilus.com/...

  • Page 74: Reporting Incidents

    Reporting incidents If an incident occurs, please contact Permobil by phone or e-mail. Scrapping and recycling Contact Permobil for information about scrapping agreements in force.

  • Page 75: Technical Specifications

    Technical specifications Mass of the heaviest part Backrest 7.5 kg (16.5 lb.) Pivot width 1200 mm (47") Minimum turning diameter 1490 mm (59") Required width of angled corridor 800 mm (31.5") Required doorway entry depth 1350 mm (53") Required corridor width for side opening 800 mm (31.5") Ground clearance 80 mm (3")
  • Page 76 How to contact your production unit Nashville, USA Timrå, Sweden PU TIM PU NAS Permobil AB Permobil Inc. Per Uddéns väg 20 300 Duke Drive Lebanon, TN 37090 861 36 Timrå Sweden +46 60 59 59 00 +1 800 736 0925...
  • Page 77 How to contact your local office United States Australia Permobil Inc. Permobil Australia 300 Duke Drive 8 Viewbrook Close Lebanon, TN 37090 Seven Hills, NSW, 2147 Australia +1 800 736 0925 +61 1300 845 483 +1 800 231 3256 support@permobil.com orders.au@permobil.com...
  • Page 79 Dealer’s address and telephone number...
  • Page 80 335340 eng-US www.permobil.com 7 330818 354297...

Table of Contents