Changing The Channel Selector From 16-Channel Operation To Free; Assembly Information (Sheet/Cushion) - Kenwood NX-200 K2 Service Manual

NX-200
■ Changing the channel selector from 16-channel
operation to free
1. Remove the channel selector knob.
2. Remove the circular nut.
3. Remove the mechanical stopper.
4. Reassemble the circular nut and channel selector knob
that were removed in steps 1 and 2, in their original posi-
tions.
Channel selector knob
(K29-9408-13)
Circular nut
(N14-0844-04)
Main Parts
Part Name
Plastic Cabinet (6-key)
Plastic Cabinet (18-key)
LCD ASSY
Cord ASSY (50-pin FPC)
Speaker
Switch Unit (6-key FPC)
Switch Unit (PTT FPC)
Chassis
Terminal Block
10
DISASSEMBLY FOR REPAIR
Mechanical stopper
(D32-0446-14)
Part Number Part Name
Sticker
A02-4002-23
Badge
A02-4003-23
Fibrous Sheet (SP)
B38-0923-05 Adhesive Sheet (LCD)
X42-3340-10 Cushion (50-pin FPC)
Rubber Cushion (SP)
T07-0755-15
Sheet (SP)
Adhesive Sheet
(6-key FPC)
X41-3720-10
Adhesive Sheet
(6-key FPC)
Sheet (PTT)
X41-3710-10
Adhesive Sheet
(PTT FPC)
Relay Hardware
(VCO-Chassis)
Sheet (Air)
A10-4111-21
Rubber Sheet (FET)
Sheet (Air)
Cushion (ANT)
Adhesive Sheet
E72-0425-03
(Terminal Block)

■ Assembly information (Sheet/Cushion)

When "Main Parts" is changed (ordered), "Assembled
Sheet/Cushion" should also be changed (ordered) to-
gether.
The Sticker and Sheet etc are non-reusable parts. It re-
quires the new one to get the radio's performance after
repairs.
For example, when "Plastic Cabinet (A02-4002-23 (6-
key)/A02-4003-23 (18-key))" is changed, "Sticker (B42-
7296-04)", "Badge (B43-1606-04)" and "Fibrous Sheet
(G10-1373-04)" should be ordered and changed together
because Sticker (B42-7296-04), Badge (B43-1606-04) and
Fibrous Sheet (G10-1373-04) are non-reusable.
Assembled Sheet/ Cushion
Part Number
B42-7296-04 "NXDN" is printed.
B43-1606-04 "KENWOOD" is printed.
G10-1373-04
Used for fi xing the LCD ASSY on the Illumination Guide
(LCD).
J99-0714-04
Also used for fi xing the Illumination Guide (LCD) on the
Control Unit.
G13-2258-04
G11-4272-14
Used for stabilizing the waterproof performance.
G11-4458-14 "•" (a hole) on the Sheet (SP) shows the upper side (6-key
FPC side).
Used for fi xing the Switch Unit (6-key FPC) from the back
J99-0390-04
side of the Holder (FG-SP) before soldering.
Used for fi xing the Switch Unit (6-key FPC) on the Holder
J99-0712-14
(FG-SP).
Used for fi xing the Push Knob (PTT) on the Switch Unit (PTT
G11-4428-04
FPC) and stabilizing the waterproof performance.
J99-0711-04 Used for fi xing the Switch Unit (PTT FPC) on the Chassis.
E29-1221-14 Used for stabilizing the shield performance of the VCO.
This sheet is put on the leak check hole.
G11-4331-04
This sheet lets air through, but does not let water through.
G11-4429-04 Used for stabilizing the radiation performance of the FET.
G11-4440-04 This sheet is a protect cover of the sheet (G11-4331-04).
G13-2220-04 Used for fi xing the Terminal ASSY.
Used for fi xing the Terminal Block and the Packing (Terminal
J99-0725-04
Block).
Remark