Channel Setting Confirmation - Kenwood TK-3101 Instruction Manual

CHANNEL SETTING CONFIRMATION
You can confirm the channels settings of your [Beep pattern |
transceiver. Number Beep pattern
Note:
¢@
After confirming a setting, you must turn the power OFF and then
m@ Frequency Confirmation
1 Select the channel you want to confirm.
2 Press and hold the PTT switch, then turn the
power ON.
e The beep pattern will sound. (i.e.- If frequency 3 is
set up on the channel, three (3) short beeps will
sound.)
: Default QT/DQT |
10 (94.8Hz) |
13 (103.5 Hz)
| 1
| 3
| 4 5 (79.7 Hz)
| 5
| 8
3 Turn the power OFF after confirming the number.
m@ QT/DOT Tone Confirmation
1 Select the channel you want to confirm.
2 Press and hold the Monitor key, then turn the
| 6
| 9
power ON.
cle
17